Tariffs & Energy Bills

Every electricity bill tells a story. Most businesses only read the last page: the total, the due date and a quiet sigh. An energy audit reads the whole thing, from the first kilowatt-hour to the last rand, and asks the question nobody else asks: where exactly did all of this go?

Today you can run that investigation two ways. You can hire a professional energy auditor to walk your site, or you can install commercial energy audit software that watches your consumption every few minutes, every day of the year. So which one is right for your business? Short answer: the best results come from using both. A professional audit finds the problems and puts a price on them. Software proves the fixes worked and catches the next problem before it reaches your bill.

This guide explains what an energy audit actually involves, what energy audit software can and cannot do, what South African businesses should budget for, which incentives can help pay for it, and a step-by-step method you can start this week.

Key takeaways

  • An energy audit is a structured review of how, where and when your business uses energy, and what it costs. The international standard for it is ISO 50002-1.
  • Energy audit software turns your meter and sensor data into baselines, alerts and reports. It never sleeps, but it cannot see a leaking pipe or a badly set thermostat on its own.
  • A professional audit brings expert eyes, a site walk-through and a prioritised list of savings with costs and paybacks.
  • Many South African businesses can find savings on the bill itself before touching any equipment: wrong tariffs, demand charges and billing errors.
  • Section 12L, the energy efficiency tax incentive, has been extended to 31 December 2030, so verified savings can still earn a tax deduction.

What is an energy audit?

An energy audit is a systematic look at how a building, process or business uses energy, with one goal: to find practical ways to use less of it and pay less for it. A good audit answers four questions:

  1. How much energy do you use, and what does it cost?
  2. Where does it go: which equipment, areas or processes?
  3. When do you use it, and does that clash with expensive tariff periods?
  4. What can you change, what will it cost, and how quickly will it pay back?

Energy audits even have their own international standard. ISO 50002-1:2025 sets out the principles, process and deliverables of an energy audit, and it replaced the original ISO 50002:2014. You do not need to follow it to the letter to get value from an audit, but it is a useful yardstick when you compare auditors or software reports.

The three levels of energy audit

Not every audit is the same size. Most energy professionals talk about three levels, and each one goes deeper (and costs more) than the last.

  • Level 1, the walk-through: a review of bills plus a site visit to spot obvious waste. It is quick, low-cost and often uncovers the easy wins.
  • Level 2, the detailed audit: measurements, equipment inventories and an energy breakdown by end use, with savings and payback estimates for each measure.
  • Level 3, the investment-grade audit: detailed engineering analysis for large capital projects, the kind of report a finance committee or bank will want to see.

For most shops, restaurants, offices and franchise stores, a Level 1 audit backed by good data is the sweet spot. Factories and large sites usually need Level 2, which we cover in our guide to reducing energy costs in manufacturing.

What energy audit software actually does

Think of a professional audit as a detective visiting the scene. Energy audit software is the CCTV camera that never blinks. It collects data from your meters, sub-meters and sensors, sends it to the cloud and turns it into something a busy manager can act on.

Good commercial energy audit software typically does the following:

  • Captures interval data: readings every few minutes instead of one number a month. Energyrite’s monitoring records at 5-minute intervals.
  • Builds a baseline: it learns what “normal” looks like for each day of the week and time of day.
  • Finds the base load: it shows what your site uses when nobody is there, which is usually the biggest single source of waste.
  • Benchmarks: it compares sites, days or months, for example kWh per square metre or per store.
  • Flags anomalies: it sends alerts when usage jumps outside the expected range.
  • Models tariffs: it shows how much of your bill falls in peak, standard and off-peak periods.
  • Proves savings: before-and-after reports show whether a change actually worked.
3 a.m.

Try the 3 a.m. test. Look at what your site uses at 3 a.m. on a weekday, when nobody should be working. That number, multiplied by every hour you are closed, is often the fastest saving you will ever find.

Where software is blind

Software is brilliant at telling you that something is wrong and when it happens. It is less good at telling you why. Data will show that your air conditioning runs all weekend, but it takes a person to find the timer that was set incorrectly after a power cut. Software also cannot see things it does not measure, such as a poorly insulated hot water pipe, a damaged fridge seal or a compressed air leak behind a machine. That is exactly where a professional walk-through earns its fee.

Energy audit software vs a professional energy audit

Here is how the two approaches compare on the things that matter to a business owner.

What you needEnergy audit softwareProfessional energy audit
How it worksMeters and sensors send data to a dashboard around the clockAn auditor reviews bills, visits the site and measures equipment
Finds hidden wasteYes, when the waste shows up in the data, such as night-time loadsYes, including physical problems the data cannot see
Explains the causePoints to when and whereExplains why and recommends the fix
Speed of resultsUseful insights within a few weeks of dataA report within days or weeks of the visit
Ongoing valueContinuous: catches new problems and proves savingsA snapshot in time unless repeated
Cost structureInstallation plus a monthly feeA once-off fee that scales with site size and audit level
Best forMulti-site businesses and anyone who wants savings to stickFinding the opportunities and building the business case

The strongest approach combines both: an audit to find the savings, and software to keep them.

An audit without monitoring is a photograph. Monitoring without an audit is a video nobody watches. Put them together and you have a plan.

Start with the bill: the cheapest audit you will ever do

Before anybody touches a light switch, look at the bill itself. In South Africa, a surprising share of savings comes from how you are billed rather than how much you use. Electricity is also getting more expensive every year: Eskom’s direct tariffs rose by an average of 8.76% on 1 April 2026, and municipalities passed on an average of 9.01% from 1 July 2026, according to Eskom’s announcement of the NERSA decision.

A proper bill audit checks things like:

Billing mistakes are not just theory. Energyrite’s own team has uncovered a major meter error while auditing a customer’s account. If the line items on your bill are a mystery, our guide on how to read your monthly utility bill will help, and our step-by-step business energy bill review walks you through a full check. Not sure whether it is worth the effort? These signs you are overpaying for electricity will tell you quickly.

Try this today

Pull your last 12 bills and put the monthly kWh, rand total and maximum demand (if you have it) side by side. Any month that jumps for no obvious reason, such as no extra trading days, no heatwave and no new equipment, is your first clue.

How to run a commercial energy audit, step by step

Whether you do it yourself, hire an auditor or use software, the process follows the same logic.

  1. Set the goal and scope. Decide what you want: lower bills, a carbon figure for a client, a Section 12L claim or a business case for solar. Then decide which sites and systems to include.
  2. Collect 12 months of bills. These give you the baseline, the seasonal pattern and the tariff details.
  3. Get interval data. Monthly bills hide the story. Data at 5- to 30-minute intervals shows base load, peaks and weekend use.
  4. Walk the site, at opening and at closing. Note every major load: refrigeration, HVAC, lighting, kitchen equipment, compressors, pumps and geysers. Check timers, thermostats and settings.
  5. Break down where the energy goes. Estimate or measure each major end use so you know which ones are worth attacking first.
  6. List the opportunities. For each one, estimate the saving, the cost and the payback. Split them into no-cost behaviour changes, quick wins and capital projects.
  7. Act, starting with the free fixes. Settings, schedules and habits cost nothing and often deliver the first 5 to 10% of savings.
  8. Measure and verify. Compare the results with the baseline, adjusting for weather and trading days. This is where software pays for itself.

What energy audits usually find

Every site is different, but certain findings come up again and again. Here are the most common ones in South African commercial buildings, and how to deal with each.

FindingHow it shows upTypical fix
High base load after hoursUsage at night and on Sundays barely dropsTimers, automation and a closing checklist
Wrong or outdated tariffBill structure does not match how you tradeTariff analysis and a change request
Peak-time spikesLarge loads start together in the peak periodStagger start-ups and shift flexible loads
HVAC fighting itselfHeating and cooling run at the same time, or all weekendReset set points and schedules, then service
Ageing refrigerationCompressors run almost non-stopClean coils, replace seals, monitor temperatures
Billing errorsEstimated readings or charges that do not match the meterDispute with evidence from your own data

Most of these can be spotted in the data first, then confirmed on site.

If your business runs refrigeration, add cold rooms and freezers to your audit list. Our guide to cold storage monitoring explains how to find refrigeration waste. If you want to know whether your consumption is reasonable for your type of site, read how to tell if your business energy use is normal.

How to choose commercial energy audit software

There are many energy audit tools on the market, from spreadsheets to full energy management platforms. Rather than chasing features, ask these questions:

  • Does it measure your site, or only your bills? Bill-only tools miss night-time waste and short peaks.
  • How often does it record? Five-minute or 15-minute data is far more useful than hourly or daily data.
  • Can it monitor individual circuits? Sub-metering shows which equipment is responsible.
  • Does it understand South African tariffs? Time-of-use periods, seasons and demand charges should be built in.
  • Are the alerts useful? You want a message when something is wrong, not a daily flood of noise.
  • Can you compare sites? This is essential for franchise groups and multi-site businesses.
  • Do the reports suit both your accountant and your technician? One wants rand, the other wants kW.
  • Does it keep working through outages? Devices should store readings and upload them when power returns.
  • Who supports it? Local installation and support matter more than a long feature list.

Energyrite’s real-time monitoring covers the data side, our energy alerts flag unusual consumption, and our analytics and reporting turn it into daily and monthly reports you can act on.

How much does an energy audit cost in South Africa?

There is no fixed price list, because the cost depends on four things:

  • Site size and complexity: a single shop is quick to audit; a factory with compressed air and process heat is not.
  • Audit level: a walk-through costs a fraction of an investment-grade audit.
  • Data availability: good interval data shortens the work. No data means the auditor must measure first.
  • What you need the report for: a formal report for a tax claim or bank loan takes more work than an internal action list.

The better question is what the audit will save. Ask any auditor or software provider for an estimate of the savings range and payback before you sign. If the payback on the audit itself is more than a year, ask why.

Incentives and support worth knowing about

  • Section 12L tax incentive. The energy efficiency savings deduction was due to expire at the end of 2025, but it has been extended by five years to 31 December 2030. Savings must be measured and verified, which is another reason to install monitoring before and after any project.
  • NCPC-SA support. The National Cleaner Production Centre of South Africa offers energy assessments, training and technical assistance to industrial and commercial businesses.
  • Energy Performance Certificates. Certain large non-residential buildings must display an Energy Performance Certificate. The registration deadline was 7 December 2025, so if you own or run a qualifying building, an audit is a sensible first step towards improving your rating.

Want a second pair of eyes on your energy?

Energyrite’s tariff analysis and bill audits find billing errors and tariff savings. Our monitoring shows exactly where the rest of your energy goes.

See our tariff analysis and bill audits

Five energy audit myths, busted

Myth: “We are too small for an energy audit.”

Small businesses often have the highest share of avoidable waste, because nobody is watching. A walk-through and a few weeks of data can pay back within months.

Myth: “Software replaces the auditor.”

Software tells you when and where. It cannot always tell you why. Use it to find the questions, and use people to answer them.

Myth: “An audit means buying expensive equipment.”

The first savings are usually free: settings, schedules, tariff changes and habits. Capital projects come later, once the data proves they are worth it.

Myth: “Our bill is correct because the utility calculated it.”

Estimated readings, wrong tariffs and meter faults all happen. Your own interval data is the best evidence you can bring to a dispute.

Myth: “One audit and we are done.”

Businesses change: new equipment, new trading hours, new staff. Without ongoing monitoring, savings fade. Continuous data keeps them in place.

The bottom line

An energy audit is not paperwork. It is a treasure hunt where the treasure is your own money. Start with the bill, add real data, walk the site with fresh eyes and fix the free things first. Then let monitoring keep watch so the savings stay saved.

Ready to start? Contact Energyrite for a walk-through, or call us on 061 549 8534.

Frequently asked questions

What is commercial energy audit software?

Commercial energy audit software collects consumption data from your meters, sub-meters and sensors and turns it into baselines, benchmarks, alerts and savings reports. It shows when and where a business uses energy, and it can prove whether energy-saving changes actually worked.

What is the difference between energy audit software and an energy audit?

Software monitors your energy use continuously and flags problems in the data. A professional energy audit is a structured review, usually including a site visit, that explains why energy is being wasted and recommends fixes with costs and paybacks. The best results come from combining both.

What are the three types of energy audit?

Most professionals describe three levels: a walk-through audit that reviews bills and spots obvious waste, a detailed audit that measures equipment and breaks energy use down by end use, and an investment-grade audit with detailed engineering analysis for large capital projects.

How long does a commercial energy audit take?

A walk-through audit of a single shop or office can take a day or two plus reporting time. Detailed audits of larger sites take longer, especially if equipment must be measured. Having 12 months of bills and interval data ready makes the process much faster.

How much can an energy audit save?

Savings depend on the site, but many businesses find no-cost savings first in settings, schedules, after-hours loads and tariff choices. A good audit should estimate the saving, cost and payback of every measure it recommends.

Can an energy audit help me claim the Section 12L tax incentive?

Yes. Section 12L allows a tax deduction for verified energy efficiency savings and has been extended to 31 December 2030. The savings must be measured and verified, so a baseline from an audit and monitoring data is an important first step.

Is an energy audit the same as an Energy Performance Certificate?

No. An Energy Performance Certificate rates a qualifying building’s energy performance and must be issued by a registered EPC professional. An energy audit is a broader review that finds ways to reduce energy use, which can help improve a building’s rating over time.